首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   6112篇
  免费   1375篇
  国内免费   2372篇
化学   4501篇
晶体学   305篇
力学   489篇
综合类   360篇
数学   1071篇
物理学   3133篇
  2024年   6篇
  2023年   52篇
  2022年   182篇
  2021年   163篇
  2020年   187篇
  2019年   209篇
  2018年   195篇
  2017年   280篇
  2016年   183篇
  2015年   282篇
  2014年   339篇
  2013年   500篇
  2012年   449篇
  2011年   536篇
  2010年   515篇
  2009年   587篇
  2008年   665篇
  2007年   635篇
  2006年   599篇
  2005年   521篇
  2004年   451篇
  2003年   308篇
  2002年   293篇
  2001年   312篇
  2000年   355篇
  1999年   191篇
  1998年   100篇
  1997年   89篇
  1996年   75篇
  1995年   66篇
  1994年   66篇
  1993年   59篇
  1992年   53篇
  1991年   41篇
  1990年   44篇
  1989年   45篇
  1988年   42篇
  1987年   30篇
  1986年   22篇
  1985年   16篇
  1984年   13篇
  1983年   19篇
  1982年   16篇
  1981年   9篇
  1980年   11篇
  1979年   9篇
  1978年   13篇
  1976年   4篇
  1965年   5篇
  1964年   4篇
排序方式: 共有9859条查询结果,搜索用时 31 毫秒
1.
Dendrite formation is a major obstacle, e.g., capacity loss and short circuit, to the next-generation high-energy-density lithium (Li)-metal batteries. The development of successful Li dendrite mitigation strategies is impeded by an insufficient understanding in Li dendrite growth mechanisms. The Li-plating-induced internal stress in Li-metal and its effects on dendrite growth have been widely studied, but the underlying microcosmic mechanism is elusive. In the present study, the role of the plating-induced stress in dendrite formation is analyzed through first-principles calculations and ab initio molecular dynamic (AIMD) simulations. It is shown that the deposited Li forms a stable atomic nanofilm structure on the copper (Cu) substrate, and the adsorption energy of Li atoms increases from the Li-Cu interface to the deposited Li surface, leading to more aggregated Li atoms at the interface. Compared with the pristine Li-metal, the deposited Li in the early stage becomes compacted and suffers the in-plane compressive stress. Interestingly, there is a giant strain gradient distribution from the Li-Cu interface to the deposited Li surface, making the deposited atoms adjacent to the Cu surface tend to press upwards with perturbation and causing the dendrite growth. This provides an insight into the atomicscale origin of Li dendrite growth, and may be useful for suppressing the Li dendrite in Li-metal-based rechargeable batteries.  相似文献   
2.
建立了同时测定尿液中复方α-酮酸片5种有效成分(消旋羟蛋氨酸钙(HMACa)、酮缬氨酸钙(KVCa)、消旋酮异亮氨酸钙(KILCa)、酮亮氨酸钙(KLCa)和酮苯丙氨酸钙(KPACa))的离子对反相高效液相色谱法。分别考察了离子对试剂浓度、缓冲盐浓度和流动相pH值等参数对分离情况的影响。最终采用Waters Symmetry C18色谱柱(250 mm×4.6 mm,5μm);以乙腈和含15 mmol/L四丁基氢氧化铵的20 mmol/L磷酸盐缓冲液(pH 7.0)为流动相进行梯度洗脱,流速为1.0 mL/min;柱温为35℃;检测波长为210 nm。在上述条件下,5种有效成分得到很好的分离,并且不受尿液中内源性基质的干扰,在20~200 mg/L范围内线性关系良好(r≥0.999 0);HMACa、KVCa、KILCa、KLCa和KPACa的检出限(S/N=3)分别为3.0、5.0、3.6、5.7和2.5 mg/L;定量限(S/N=10)分别为9.6、16.7、12.0、19.0和8.3 mg/L;日间、日内精密度均小于7%;平均回收率在86.79%~112.00%之间,RSD小于9%(n=5)。该方法准确,灵敏度高,重现性好,适用于尿液中这5种有效成分的检测。  相似文献   
3.
在EAST装置上安装了X模极化W波段多道相关反射仪,用于测量等离子体芯部密度涨落。该诊断利用低损耗(<3dB)多工器将4个不同频率(79.2GHz,85.2GHz,91.8GHz和96GHz)的微波耦合在一起,通过同一个天线发射。反射波由两个极向分离(~5cm)的天线接收,通过下变频技术实现外差测量。通过对两个极向天线接收的信号进行相关分析,获得芯部湍流垂直速度。对2018年低约束模式(L模)放电进行分析发现,在电子回旋共振加热(ECRH)等离子体中,芯部湍流垂直速度在电子逆磁漂移方向。而在注入同向中性束(co-NBI)后,芯部湍流垂直速度变为离子逆磁漂移方向。  相似文献   
4.
5.
基于深度学习的方法,在HL-2A装置上开发出了一套边缘局域模(ELM)实时识别算法。算法使用5200次放电数据(约24.19万数据切片)进行学习,得到一个深度为22层的卷积神经网络。为衡量算法的识别能力,识别了HL-2A装置自2009年实现稳定ELMy H模放电以来所有历史数据(约26000次放电数据),共识别出1665次H模放电,其中误识别35次,误报率为2.10%。在实际的1634次H模放电中,漏识别4次,漏识别率为0.24%。该误报率和漏报率可以满足ELM实时识别的精度要求。识别算法在实时控制环境下,对单个时间点的平均计算时间为0.46ms,可以满足实时控制的计算速度要求。  相似文献   
6.
钟国柱 《发光学报》2006,27(1):6-17
电致发光薄膜是平板显示器的重要材料之一,我们从研究ZnS:Mn,Cu直流电致发光薄膜的大面积稳定发光开始,首次将稀土离子引进直流电致发光薄膜,实现了各色的直流电致发光,并研究其激发机理、过热电子的能量分布、稀土离子的碰撞截面和稀土离子发光中心在晶格中的位置等。在国内首先研制成功ZnS:Mn交流电致发光薄膜计算机终端显示器,并扩大面积到640×480像素(对角线10英寸)。为了实现彩色化显示,研制出稀土离子掺杂的各色交流电致发光薄膜。研究不同稀土离子在薄膜中的浓度猝灭,以便提高薄膜的发光亮度。在致力于实现彩色的过程中,首要的任务是提高蓝色电致发光薄膜的亮度和探索新的蓝色电致发光薄膜材料:从ZnS:TmF3到CaS:TmF3,发光亮度有了很大的提高;使SrS:Ce薄膜蓝色电致发光的亮度超过1000cd/m2;同时探索纳米Si和非晶Si/SiO2超晶格结构的蓝色电致发光。成功地实现了ZnS:Mn/SrS:Ce白色电致发光和SrS:HoF3三基色线谱发射的白色电致发光,发光亮度也超过1000cd/m2。  相似文献   
7.
ZnS作为空穴缓冲层的新型有机发光二极管   总被引:3,自引:3,他引:0       下载免费PDF全文
仲飞  叶勤  刘彭义  翟琳  吴敬  张靖垒 《发光学报》2006,27(6):877-881
采用磁控溅射方法在ITO表面沉积了不同厚度的ZnS超薄膜作为有机发光二极管(OLEDs)的缓冲层,使典型结构(ITO/TPD/Alq3/Al)的OLEDs的发光性能得到改善。ZnS缓冲层厚度对器件性能影响的实验结果表明,当ZnS缓冲层厚度为5nm时,器件电流密度提高了近2倍,亮度提高了2倍;当ZnS缓冲层厚度为10nm时,器件发光的电流效率提高18%,器件的性能得到改善。宽禁带的ZnS缓冲层对空穴从阳极到有机功能层的注入有阻碍作用,促进器件载流子平衡,提高了器件发光效率,改善了器件性能。  相似文献   
8.
A new type of THz waveguides, which employs a solid polyethylene rod as the core and polyethylene tubes in a periodic array of square lattice as the cladding, is proposed. Optical properties of this new THz waveguide, especially in dispersion, confinement loss and single mode property, are investigated in detail with the plane wave expansion method and the beam propagation method. Numerical results demonstrate that the new THz waveguide can reach not only low dispersion but also low confinement loss at single mode propagation. Therefore, the square lattice structure is a better candidate as THz waveguides than the triangular ones.  相似文献   
9.
给出2005年全国部分高校研究生数学建模竞赛D题的研究背景,对参赛论文作了简要评注,并提供了一种参考解答.  相似文献   
10.
本文应用上、下解方法和 Leray-Schauder不动点定理 ,证明了一类拟线性椭圆方程边值问题弱解的存在性 ,并且给出了一个应用实例  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号